Perancangan Dokumen SNI ISO 17025:2017 untuk Laboratorium Beton dan Konstruksi di Universitas Kristen Petra

Karmila Shieny Gunawan(1*), Jani Rahardjo(2),


(1) Industrial Engineering Department, Petra Christian University
(2) Industrial Engineering Department, Petra Christian University
(*) Corresponding Author

Abstract


Concrete and Construction Laboratory of Petra Christian University (PCU) is one of the testing laboratories under the auspices of the Civil Engineering study program and faculty of Civil Engineering and Planning. Design of SNI ISO 17025:2017 document is required for the Concrete and Construction Laboratory of PCU to obtain accreditation in order that the concrete test results can be recognized internationally. This research was conducted by identifying business processes, conducting initial and final document gap analysis, document creation, and document verification. The results of the initial document gap analysis show that the percentage of document completeness that the laboratory has is 8,74% with a total of four documents. Document creation is done by designing and creating documents that are not yet available as well as making adjustments to the documents that are already available. After the documents have been created and verified, the results of final document gap analysis show that the percentage of document completeness has increased to 80,60% with a total of 59 documents. The increase in the document completeness through the results of the initial and final document gap analysis was 71,86%.

Keywords


document design; laboratory management system; SNI ISO 17025:2017

Full Text:

PDF

References


Universitas Kristen Petra, Sejarah, Visi & Misi, 2021, retrieved from https://www.petra.ac.id/ on 06 December 2021.

ISO, ISO/IEC 17025:2017, 2017, retrieved from https://www.iso.org/standard/66912.html on 06 December 2021.

Faridah, D. N., Erawan, D., Sutriah, K., Hadi, A., and Budiantari, F., Implementasi SNI ISO/IEC 17025:2017 - Persyaratan Umum Kompetensi Laboratorium Pengujian dan Laboratorium Kalibrasi, 2018, retrieved from https://perpustakaan.bsn.go.id/repository/dcdf4bfc61c524fb89f0c7474778199a.pdf on 06 December 2021.

Mutu Institute, Apa Itu Laboratorium Pengujian dan Kalibrasi, 2021, retrieved from https://mutuinstitute.com/post/laboratorium-pengujian-dan-kalibrasi/ on 28 December 2021.

Resmiaty, T., and Sari, R., Aplikasi Sistem Informasi dan Manajemen Laboratorium, 2017, retrieved from http://bppsdmk.kemkes.go.id/pus diksdmk/wp-content/uploads/2017/11/Aplikasi-Sistem-Informasi-Dan-Manajemen-Laboratorium-SC.pdf on 28 December 2021.

Picard, M., Renault, A., Barafort, B., and Cortina, S., Measuring Readiness for Compliance: A Gap Analysis Tool to Complete The TIPA Process Assessment Framework, European Conference on Software Process Improvement, Springer, Cham, 2016, pp. 106-116.

Labmutu, Dokumen Sistem Manajemen Mutu berdasarkan ISO/IEC 17025:2017, 2022, retrieved from https://www.labmutu.com/2020/07 /dokumen-sistem-manajemen-mutu.html on 09 June 2022.


Refbacks

  • There are currently no refbacks.