Andre Hutomo, Tommy Syatriadi, Gogot Setyo Budi


Terdapat banyak formula untuk memprediksi daya dukung friksi pondasi tiang. Penelitian ini bertujuan untuk membandingkan prediksi nilai friksi pondasi tiang berdasarkan data hasil penyelidikan tanah dengan nilai friksi hasil pengujian VWSG ( Vibrating Wire Strain Gauge ). Pada penelitian ini pengumpulan data nilai SPT dan VWSG dilakukan pada 2 lokasi. Nilai friksi pondasi tiang berdasarkan nilai SPT digunakan metode Meyerhof (1976), Decourt (1982), Bazaraa & Kurkur (1986), Shariatmadari N, Eslami A & Karimpour-fard M (2008) dan Schmertmann (1967). Selain itu digunakan juga α-method dan β-method untuk memprediksi nilai friksi pondasi tiang berdasarkan parameter tanah hasil penyelidikan laboratorium. Hasil penelitian menunjukkan bahwa nilai prediksi friksi pada tanah lempung sangat lunak sampai lunak dengan nilai SPT 0 sampai 4 jauh lebih kecil dari nilai friksi hasil VWSG. Sedangkan untuk tanah lempung sangat kaku dengan nilai SPT 15 sampai 30, nilai prediksi friksi berdasarkan SPT mendekati nilai VWSG. Lain halnya dengan tanah pasir, nilai prediksi friksi berdasarkan nilai SPT jauh lebih kecil dibandikan nilai friksi hasil VWSG.


friksi pondasi tiang , VWSG , N-SPT

Full Text:



Ajayi, L.A. and Balogum, L.A. (1988). “Penetration Testing in Tropical Lateritic and

Residual Soils – Nigerian Experience.” In: De Ruiter (Eds.). Penetration Testing ISOPT-1.(pp. 315-328).Rotterdam, Netherland: Balkema

Bazaraa, A. R. & Kurkur, M. M. (1986). “N-Values Used to Predict Settlements of Piles in Egypt.” Proceedings of In Situ ’86., (pp. 462-474). New York, America

Decourt, L. (1982). “Prediction of the Bearing Capacity of Piles Based Exclusively on N-Value of the SPT. Vol 1.” Proceedings of 2nd European Symposium on Penetration Testing (pp. 29-34), Amsterdam, Netherland.

Decourt, L. (1990). The Standard Penetration Test, State of the Art Report. (pp. 1-12). Oslo, Norway: Norwegian Geotechnical Institute Publication

Hara, A., Ohta, T., Niwa, M., Tanaka, S., and Banno, T. (1974) Shear Modulus and Shear Strength of Cohesive Soils, Soils and Foundation., 14(3), 1-12.

Hettiarachchi, H., Brown, T. (2009). “Use of SPT Blow Counts to Estimate Shear Strength Properties of Soils: Energy Balance Approach.” Journal of Geotechnical and Geoenvironmental engineering, ASCE, 135 (6), (pp. 830-834).

Japan Road Association (1990). “Part V Seismic Design.” Design Specifications of Highway Bridges. Maruzen, Tokyo, Japan.

Kulhawy, F. H., O'Rourke, T. D., Cornell University., & Electric Power Research Institute. (1983). Transmission Line Structure Foundations for Uplift-Compression Loading: Load Test Summaries. Palo Alto, Calif: Electric Power Research Institute.

Coyle, Harry & R. Castello, Reno. (1981). “New Design Correlations For Piles In Sand”. Journal of the Geotechnical Engineering Division. (Vol.107.pp. 965-986).

Meyerhof, G. G. (1976). “Bearing Capacity of Settlement of Pile Foundations.” The Eleventh Terzaghi Lecture, ASCE Journal of Geotechnical Engineering. (Vol. 102. pp. 195-228).

Peck, R.B., Hanson, W.E., and Thornburn, T.H. (1953). Foundation Engineering. John Wiley and Sons. pp.222.

Reese,L.C & O’Neill,M.W. (1989). “New Design Method for Drilled Shafts from Common Soil and Rock Tests.” Proceedings of Congress Foundation Engineering-Current Princi-Ples and Practices ASCE. (Vol. 2. pp 1026-1039).

Sanglerat, G. (1972) The Penetration and Soil Exploration. (pp.464). Elsevier Publishing Co. Amsterdam,Netherlands.

Schmertmann, J.H. (1967). Static Cone Penetrometer for Soil Exploration Civil Engineering. 37 (6), 71-73.

Shariatmadari, Nader & Eslami, A & Karimpour-Fard, Mehran. (2008). “Bearing Capacity of Driven Piles in Sands from SPT-Applied to 60 Case Histories.” Iranian Journal of Science & Technology. (32), 125-140.

Shioi, Y. and Fukui, J. (1982) Application of N-Value to Design of Foundation in Japan.(Vol. 1. pp. 40-93).

Sowers, G. F. (1979) Introductory Soil Mechanics and Foundations, 4th edition. Macmillan, New York, United States

Sowers, G.F. (1953). “Soil Problems in the Southern Piedmont Region.” Proceeding of ASCE 80. (pp. 18)

Stroud, M. A. (1974). “The Standard Penetration Test in Insensitive Clays and Soft Rock.” Proceedings of the 1st European Symposium on Penetration Testing. (vol. 2(2). Pp. 367-375). Stockholm, Sweden.

Terzaghi, K. And Peck, R. B. (2000). Soil Mechanic in Engineering Practice, 2nd ed., John Wiley. New York.

Terzaghi, K. and Peck, R.B. (1967). Soil Mechanics in Engineering Practice, John Wiley, New York. 729.


  • There are currently no refbacks.

Jurnal telah terindeks oleh :