Hazard Identification Berdasarkan OHSAS 18001:2007 di Universitas X

Veronica Hartanto(1*),


(1) Industrial Engineering Department, Petra Christian University
(*) Corresponding Author

Abstract


X University has many high rise buildings and laboratories. These buildings and facilities can cause work accidents. Hazard Identification is the first step required to be submitted to all related parties as inputs for building management and laboratory. Hazard Identification steps are required to be submitted to all related parties as inputs for building management and laboratory. This hazard identification is based on the OHSAS 18001: 2007 (point 4.3.1). Potential unsafe condition obtained at the identification stage consist of the potential hazard types of fall at ground level, struck against, struck by, electrical contact, burn, fall from above, and caught in. Potential unhealthy conditions obtained at the identification stage found potential biological, chemical, and physical health problems. It was also obtained the potential danger of damaged documents and damaged assets.

Keywords


OHSAS 18001: 2007; hazard identification

Full Text:

PDF

References


Simanjuntak, D. P. (1994). Manajemen Keselamatan Kerja. Jakarta: Himpunan Pembina Sumberdaya Manusia Indonesia (HPSMI).

Ciptaningsih, F., Ekawati, & Kurniawan, B. (2014). Evaluasi Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di Perusahaan Industri Baja. Diakses pada hari Selasa 30 Januari 2018, pukul 16.00, http://ejournal-s1.undip.ac.id/index.php/jkm.

OHSAS Project Group 2007. (2007). Occupational Health and Safety Management Systems. Peraturan Menteri Tenaga Kerja Republik Indonesia. (1996). Sistem manajemen keselamatan dan kesehatan kerja. Departemen Tenaga Kerja Republik Indonesia.

Supriyadi, & Ramdan, F. (2017). Identifikasi Bahaya dan Penilaian Risiko pada Divisi Boiler Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Diakses pada hari Kamis 1 Februari 2018, pukul 09.39, https://ejournal.unida.gontor.ac.id.

Rositasari, M., Widaningrum, S., & Iqbal, M. (2015). Perancangan Pengendalian Risiko Bahaya K3 Berdasarkan Hasil HIRARC dengan Memenuhi Requirement OHSAS 18001:2007 Terkait Klausul 4.4.7 dan Peraturan Pemerintah No 50 Tahun 2012 pada PT. Beton Elemenindo Perkasa. Diakses pada hari Rabu 31 Januari 2018, pukul 16.39, http://repository.telkomuniversity.ac.id/pustaka/files/101591/jurnal_eproc/identifikasi-dan-pengendalian-k3-menggunakan-hirarc-untuk-memenuhi-requirement-ohsas-18001-2007-terkait-klausul-4-4-7-dan-4-5-3-di-pt-beton-elemenindo-perkasa.pdf.

Anton, T. J. (1989). Occupational Safety and Health Management. Singapore: McGraw-Hill.


Refbacks

  • There are currently no refbacks.