Perancangan Standar Proses dan Waktu Proses Pembuatan Packing pada Suplier PT X.

Bernardus Valiant(1*), Tanti Octavia(2),


(1) Industrial Engineering Department, Petra Christian University
(2) Industrial Engineering Department, Petra Christian University
(*) Corresponding Author

Abstract


The purpose of this research is to design packing standard process and processing time in PT X. The standard process and processing time is needed because at this time PT X does not have standard process and processing time especially in packing KPA 148. With having the standard process and processing time, it is expected to give quality assurance for the process.

The standard of design process and process time is done by conducting experiments based on data making of other type A packing (KPA043) in each process. The results of the recommended experiments will be written into Work Instruction (WI) and then implemented. The results obtained in the form of standard and processing time where the milling process has a standard time of 750 seconds, the cutting length process has a standard 9.2 - 10.8 mm and standard on hotpress process using temperature 147 - 153oC for 200 seconds for packing KPA 148.


Keywords


standard process; work instruction

Full Text:

PDF

References


Bissell, Derek. Statistical Methods for SPC And TQM. London: Chapman & Hall, 1994

Hutchins, Gregory B. Introduction to Quality. New York: Collier Macmillan Canada, 1991

Monrgomery, Dougls C. (2005). Stastiscal Quality Control. 5ed. United States of America: John Wiley & Sons, Inc.

Tricker, Ray, & Sherring-Lucas, Bruce. (2005). ISO 9001:2000 in brief (2nded). Great Britian: Biddles Ltd, King’s Lynn, & Norfolk


Refbacks

  • There are currently no refbacks.